Publish Time: 2019-09-17 Origin: Site
Now, more and more people use vinyl fences. It must also be because vinyl fence is almost maintenance-free, easy to install, diverse in variety and specifications, safe and environmentally friendly, and low in overall cost. Although the installation of the vinyl horse fence is easy, some people have to ask, is it necessary to use the wooden column when installing? In fact, it is needed. It still has great benefits, let's talk about the benefits of a wooden column.
Advantages of vinyl fences
Installation steps
Wooden insert benefits
1. No need to spray paint, almost no maintenance can still maintain the new and not old.
2. Production and installation is simple and fast, greatly improving the installation efficiency.
3. Variety of variety specifications
4. Safe, environmentally friendly, no harm to people
5. Low comprehensive cost and long service life
After determining the attribute line and legal setbacks, mark the location of the fence. Mark the position of the corner hole with paint. Mark the position of the remaining bobbins, keeping the distance between the columns evenly spaced about 8'.
Using a column hole excavator, dig a hole about 24" deep and 10" in diameter. Add a few inches of gravel to the bottom of the hole to drain. Insert the corner post into the hole. Make sure the posts are horizontal and vertical. Temporarily fix the 2"x4" struts on the top of the pillars and on the ground.
Run a string from the top edge of the corner post. Make sure the strings are tight and level. This provides a guide to make sure all posts are installed at the same height. Install the remaining line columns and check that each line column is vertical, the same height as the corner posts.
The vinyl fence is composed of a bottom rail, a top rail and a slat. Assemble them according to the manufacturer's instructions. Snap the ends of the top and bottom rails into the corresponding holes on the fence post.
Mix the quick-drying cement and pour it into the hole according to the manufacturer's instructions. The 2" x 4" support was held overnight while the cement was curing. Remove the support. Apply PVC cement to the inside of the column cap and install it on the top of the column.
If you are installing a new column, the insertion of the wood column helps to improve the stability of the entire fence system. The wooden columns provide additional support for the vinyl enclosure fence posts.
However, if there is no proper drainage system, placing a stake in the concrete can cause problems inside the vinyl pile. It is essentially like a sponge that accelerates the decay of the pillars. Add a compacted stone under the column to avoid this problem.
If you are repairing an existing column with a rotten wood insert, you can use the fence pile patcher or fence peg to add new support and stability.
If your column is completely hollow, you can put a wooden post into it, but we don't recommend it. The reason is as follows. Vinyl pillars are usually not placed on 4 x 4wood and are tightly fitted. Most large box stores have actual dimensions of 3-1/2" x 3-1/2". Some of the hollow columns made of vinyl fences are real 4" square or 5" square columns. While these vinyl columns will fit the wood column, they will not fit tightly and require the difference in your gasket to fit tightly. Still, other manufacturers have designed a tight fit, but forced it to break the outer casing.
These are the reasons why vinyl fences wooden columns are needed. If you have any questions with vinyl fences, feel free to ask us.