Publish Time: 2019-07-31 Origin: Site
Nowadays, the use of vinyl fences in every block of the country is more and more widespread. Compared with the previous wood fence, it will not rot, break and deform. It does not need to be sprayed or polished, and can save a lot of time. It has a special structure and is easy to install, so it is more convenient. As long as the protection is good, it can be used for a long time. So let's talk about how to maintain the vinyl privacy fence. In order to make full use of your vinyl fence, including long life and new appearance, you must install it correctly, clean it regularly and maintain it.
1. Ensure correct installation
2. Regular cleaning
3. Inspection and maintenance
4. Conclusion
Ensure that vinyl fences are properly installed to prevent future damage from snow, wind or hail. The cost of maintaining vinyl fences is very low, and they are not vulnerable to weather conditions and are not vulnerable to weather conditions. However, if the components are not tightly integrated, they are more likely to break or rupture in bad weather. If there is any problem with the installation of vinyl fence, please consult a professional.
Vinyl fences usually need to be cleaned at least once a year. The most effective cleaning technology depends on the condition of the fence. Just spray fences with garden hoses or wipe them with sponges dipped in warm soapy water to remove dirt, dust, pollen and chalk residues.
Paint thinners are needed to remove slightly tough stains such as tar, grease and rubber. First, wear rubber gloves and goggles. Next, dip the paint thinner in the wet soft cotton cloth and gently wipe the fence. If the stain still exists, please wet the cloth again and stick it on the stain for about 30 seconds. In this way, the solvent will have time to soften the stain, and the stain can be easily erased.
Vinyl fences are easily stained by algae and fungi, showing green, yellow or black spots and patches. Scrubbing with warm soapy water removes stains, but does not kill algae or molds. White vinegar or chlorine bleach can be used to prevent the stain from returning. But bleaching agent will desalinate dark vinyl, so be careful before using. It can be tested locally and used in large area.
At least once a year, the vinyl fence is inspected and maintained.
Walk along both sides of the fence. Look carefully at the fence posts, panels and horizontal guides. It is necessary to ensure that each vertical column is firmly embedded in the ground. No shaking, tilting or loosening. Check the tight connection between the pillar and the fence. Make sure that the horizontal guide is firmly connected and not pulled away from the support or panel. The gate must not be forgotten.
If a pillar is not firmly planted on the ground, dig around it with a shovel until it falls back to its original position.
When you clean the vinyl fence, be careful not to use any type of abrasive cleaner or cleaning cloth. They scratch and remove the gloss of vinyl fences. Correct installation can ensure the use of fences. Cleaning the fence regularly will reduce a lot of stubborn dirt. Regular inspection can reduce major problems caused by minor problems.