How to cut your vinyl lattice fence?

Vinyl fences are decorative materials that many families use today, especially for their own gardens or gardens. They not only protect their privacy to a certain extent, but more importantly, they can greatly enhance and decorate. . But the vinyl lattice fence may not exactly match the size or style you want. You want to make a vinyl lattice fence that fits your garden. So at the most basic, you need to know how to cut the vinyl plaid. The ability to follow-up work is smoother, and ultimately the vinyl lattice fence achieves the effect you want.

Vinyl fences and vinyl lattice fences can be cut like wood. 

Whether you want to install your own vinyl fence or other vinyl fence projects, you may need to cut the material to suit your needs. It is important to note that the cuts need to be straight and smooth, and to prevent excessive force from breaking the material, ultimately providing the best look for your vinyl project.

Use a tape measure to measure the distance that the vinyl lattice fence needs to cover. 

Mark this distance on a vinyl lattice fence with a pencil. Use a straight edge to carefully draw a line along the length of the vinyl to mark where you need to cut.

First cut the vinyl lattice. The mesh joint is cut through the joint using a circular saw with a vinyl cutting blade. 

If you don't have a vinyl cutting blade, you can use another serrated blade. Carefully thread the saw or blade through the lattice. Slowly to prevent chipping.

Now you can cut your vinyl lattice fence section.

 For cutting vinyl lattice fences, use a circular saw with a vinyl cutting blade again. Saw between fences or pillars instead of completely through them. This will provide you with the cleanest, most perfect cut. Carefully cut the panel and slowly move along the lines to avoid cutting or cracking the fence.

Slide the vinyl lattice fence cutter into the end of the cutting rail and re-straighten the rails of the fence. 

Squeeze the clamps together (such as the ends of the scissors) and squeeze the notches into the rails. Place two notches on each side of each rail (four notches per rail; a total of eight notches).

Cut your vinyl fence post. When cutting the column, try to cut from the bottom. 

This can make the incision less obvious, even if the cutting is not good, it will not be seen at a glance. Use sawn or sawn boards to cut any extra length on the column before pouring the pillar concrete to the ground.

If you need to cut a column that is already on the ground, first remove the lid of the column. 

Measure your length and cut while keeping it as straight as possible. Cut evenly on the column, slide the lid over the top of the column, and finally cover the incision.

The above is the specific cutting steps of the vinyl lattice fence. I believe that you can follow the instructions above to complete the vinyl lattice fence that meets your needs. We are the manufacturer of vinyl fences, we offer a variety of styles of fences, or you can customize them according to your needs. If you are interested, you can visit our official website at any time, and we will update the information frequently.