How to install vinyl sign post?

Have you seen the sign post in your life? I think you must have seen it. Maybe at the fork in the park, maybe in the forest. It may also be at the door of a household on the street. When you see this article, maybe you want to try to install a sign post. Let's take a look at how to install the vinyl sign post, which is a kind of garden accents.

The first step:

Layout components included in the vinyl sign post. The parts that can be installed are pillars, cross arms, hats, piles and keys. Depending on the vinyl logo poles you purchase, there may be other accessories, such as bases, rider clips, etc.

The second step:

Use a hammer to push the pile of the vinyl sign post into the ground. When hammering, make sure that the pile is perpendicular to the ground, so that the overall appearance of the vinyl sign post is aesthetic. If you are really hard to do, you can pay attention to the big tips below, which will make the installation a breeze!

Third step:

The pile should be driven down until the floor is flush with the floor. The bottom plate should be oriented forward in the desired direction of the real estate column arm.

The fourth step:

Slide the vinyl sign post through the pile until it touches the ground. The holes in the column should be at the top and facing the desired direction of the marker arm. Slide the vinyl marker post arm into the column. Make sure the slot is facing up and the hook of the eye hook is facing outwards. Slide your arm over the hole until the slots on the inside of the slot are aligned.

The fifth step:

Slide the key into the slot of the real estate column arm until it locks into place. This will protect the arm.

The sixth step:

Slide the cap onto the top of the vinyl sign post.

The seventh step:

Screw the eyebolts into the grommet. This step requires you to select the hole location based on the specific size and size.

The eighth step:

Use a stainless steel sign clip to attach your logo to the sign arm.

Several common problems:

How deep should the vinyl sign post be?

According to our experience, 30 inches is suitable for most vinyl fence posts. Anything below this value is based on other factors such as manufacturer design and installation specifications. The rear hole should be deep enough to hold 1/3 of the length of the column and then add a 6-inch gravel base.

Does the vinyl sign post need a plug-in?

If you are installing a new struts, the wood inserts help to provide greater stability to your struts, providing stability to the entire fence system. However, if the wooden column is placed in concrete without good drainage, it may cause a series of problems in the vinyl column. It basically accelerated the decay of the column like a sponge. Add a compacted stone below the column to avoid this problem. Of course, if you are using matching stainless steel or exotic metal parts, this may not happen.

The above is the installation method of the vinyl sign post. We are a professional manufacturer of vinyl sign posts. You can visit our official website for product information at any time. We also produce many kinds of vinyl products. You are welcome to consult us.