What to do with old vinyl fence panels

The vinyl fence panel does not need to be painted and maintained, and it is not old, and it is exempt from the fatigue and trouble of maintenance. The vinyl fence panel is easy to install and install, which greatly improves the installation efficiency. It has a wide variety of specifications, is very safe and environmentally friendly, and does not harm people and animals. The vinyl fence panel has a long life, but when you don't need it, you can make it into a variety of other things, make the best use of it, and not waste it.

List of content for this article：

• Wooden clock

• Plant stand

• Wine rack

• Birdcage

• Headboard

• Coffee table

Wooden clock making steps

1. Prepare the required materials, a watch movement, some old vinyl fence panels, and some numbers.

2. The surface of the wood is slightly polished.

3. The bottom of the wood with a tool to cut groove, just put a watch core.

4. Pry the board like a wooden stick into four equal waist triangles, each of which is just the same length as the side of the groove. The four isosceles triangles that are made are joined end to end to form a square around the groove.

5. Flatten the bottom of the two sticks, because the two wooden sticks are used to make the shelves of the clock. Insert two wooden sticks under the round version of the wood to form a bracket to support the round blocks. We can adjust the angle by ourselves.

6. Install the watch core in the groove and fix it, and also put the pointer on it. Stick the previously prepared number to the edge of the round block, adjust the position, and attach the battery.

Plant stand

Just plug the old vinyl fence panels into the middle of the plant you want to isolate.

Wine rack

First determine the size and style of the wine cabinet, and then use vinyl fence panels to saw the desired wine cabinet. It is then polished, brushed with a water-based wood dye, and air dried. Finally, splicing it together, if you want what style you can adjust as needed.

Tool for making bird cages

Scythe: Scythe is one of the basic tools of bamboo workers. It is used for smashing and breaking coarse materials.

Scraper: A scraper is a special tool used to scrape off the wax layer on the surface of vinyl fence panels.

Carving knife: Carving knife is a tool used to repair the frame head and bamboo shoots.

Hand drill: The head hole and the cage wire hole must be drilled on the bird cage.

Hand saw: A hand saw is a tool for cutting materials used to cut or cut a hoe.

Wire drawing board: Drawing board is a special tool for processing bird cage wire

Steel ring mold: Steel ring mold is a special tool for processing round bird cage cages.

Alcohol lamp: It is used to adjust the circle. The temperature of the alcohol lamp is high, and it is not easy to bake the black material.

Iron rail: used to divide the pitch of the bamboo ring.

Headboard production steps

1. Measure the width of the bed and saw the vinyl fence panels out of the size of the headboard

2, smooth with a sander

3. Brush the water-based wood dye on the front of the headboard and let it dried overnight.

4. Wipe off excess dye with a rag.

5. Saw the length of the L-shaped plastic edge strip required for the four sides of the headboard.

6. Use a miter saw to cut the 45-degree angle at both ends of the length of the L-shaped plastic strip.

7. Drill a small hole in the side of the frame.

8. Install the wood screws in the small holes around to strengthen the frame.

9. Saw a wooden strip shorter than the headboard for mounting the headboard on the wall.

10. Cut the wooden strips at a diagonal angle

11. Install the upper hook on the headboard, glue it to the headboard with wood glue, and fix it with a pocket-type fixing clip.

12. Use wood screws to reinforce the mounting strips.

13. Install the support bar horizontally on the wall using a spirit level.

14. After hanging the headboard on the headboard wall, use the masking tape to stick the intersecting strips.

Coffee table production steps

1. Measure the width of the coffee table, saw the vinyl fence panels out of the size of the coffee table, and saw the vinyl fence panels out of the four legs.

2, smooth with a sander

3. Brush the water-based wood dye on the front of the coffee table and let it dried overnight.

4. Wipe off excess dye with a rag.

5. Assemble it up.

Vinyl fence panels do not require maintenance and can be used for a long time. Of course, when you don't use it, you can use it. You can make the old vinyl fence board into wooden clock, plant stand, wine rack, birdcage, headboard, coffee table. The steps will not be cumbersome, make what you want, don't waste, and make the best use of it.